DNV Approved 5083 5052 Marine Grade Aluminium Plate Boat Hulls sheets
Grade 5052 is an excellent marine grade for when formability is required. If strength is more of a concern, grade 5083 is a good alternative. 6061-T6 is an all-around popular grade of aluminum that is also commonly used in marineapplications. It has very good corrosion resistance and is precipitation hardened
Marine grade aluminum plate are applied in processing large boats, yachts and other ships,and dnv approved aluminum plate 5083 is professional anti-rust aluminum plate. Compared with other industries, marine industry pay more attention to safety and quality in many aspects. Therefore, marine grade aluminum plates with excellent performance can be applied to more ship factories. Through the alloy composition determination, casting process optimization, homogenization heat treatment and rolling process test, the product performance of aluminum plate 5083 H116 is usually applied
The DNV certificate has been regrade as the quality ensurance for marine industry, only passed the DNV certificate, the aluminum plate 5083 for the ship factory can meet the requirements of the users, especially the increase of the processing demand for the complex parts such as the aluminum plate for the ship, the rail transit, the automobile and the mold, so the application prospect is very broad. The whole ship body can be made of aluminum alloy material, with strong anti-aging ability, and has been further improved in corrosion resistance through continuous research and design, so from the long-term choice, marine aluminum alloy material belongs to the best choice.
Selection of dnv approved aluminum plate 5083 has light weight, strength, corrosion resistance, good weldability and many other advantages. Aluminium alloy has higher strength than steel, but it is more light in the weight, which will save oil, aluminium alloy still can solve the problem of rust, still can save on maintenance cost.
Aluminum metal supply the 5 best Marine Grade aluminum plate sheet available
5052 marine grade aluminum plate This alloy is remarkably resistant to seawater corrosion. Its medium to high strength alloy make-up allow for good cold formability and exceptional weldability. Magnesium is the major alloying element for 5052. In the marine industry, it is the primary material for boat hulls and cargo tanks.
5083 aluminum plate
Of all non-heat treatable alloys, this has the highest strength. 5083 is resistant to stress, cracking and exfoliation attack under in marine corrosive conditions. It has a low density and excellent thermal conductivity. It is used across many industries, but primarily shipbuilding.
5083 aluminum sheet is used to manufacture pressure vessels and tanks, truck components, marineequipment and components, and cryogenic applications
5086 aluminum sheet
This alloy shows great results when welded, retaining most of its strength. This factor, along with its corrosion resistance in seawater make it a very popular material choice for the marine industry. 5086 is used extensively for hulls and vessel gangways.
5086 aluminum sheet belongs to 5000 series alloy and is one of the key products of 5000 series aluminum plate. The main alloying elements of 5086 aluminum alloy are magnesium and silicon. The products have high corrosion resistance, good weld-ability and medium strength. 5086 aluminum can be used in the manufacture of sheet metal, metallurgy, and electrical enclosures for transportation vehicles and ships. Compared with other aluminum products, the anti-corrosion property of 5086 aluminum is an important reason for its wide application. Therefore, 5086 aluminum sheet plate has also become “rust-proof aluminum plate”. Aluminum-magnesium alloys and aluminum-manganese alloys are collectively referred to as rust-proof aluminum because the alloy components in between have their anti-corrosion properties
5456 aluminum plate
Alloy 5456 is used as a standard application in welded deck house construction of destroyers. It is a preferred material because of the 40-45% weight reduction with no loss of stability. It can be hot worked and has good strength.
6061 aluminum sheet
This alloy has good weldability and valuable mechanical properties. It is used most often because of these qualities and its strength and workability. It is used most often in deck-house structures, small boats, and bulk-heads.
| Chemical Analysis of aluminum alloy Plate |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | Remains |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | - | - | - | - | - | Remains |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | - | - | Remains |
| 1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | - | - | 0.1 | - | - | Remains |
| 1200 | 1 | 1 | 0.05 | 0.05 | - | - | - | 0.1 | 0.05 | Remains |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | Remains |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | Remains |
| 5042 | 0.2 | 0.35 | 0.15 | 0.2--.5 | 3.0-4.0 | 0.1 | - | 0.25 | 0.1 | Remains |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | Remains |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | Remains |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | - | Remains |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | Remains |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | - | 0.1 | - | Remains |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | Remains |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | - | 5.7-6.7 | 0.06 | Remains |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | Remains |
XIAOXIAN RUIYI Can manufacture aluminum alloy plate sheet as
Alloy: 1050 1060 1100 3003, 3105, 5052, 5005, 5754 5083 5182, 6061 6063 6082, 7075, 8011…
Temper: HO, H111,H12, H14, H24,H 32, H112, T4, T6, T5,T651
Surface:Mill/Emboss/Diamond/2bar/3bars/Bright
Thickness: 0.2mm to 300mm
Width: 30mm to 2300mm
Length:1000mm to 10000mm.
Aluminium plate | aluminum alloy sheet | Aluminum tread plates | Aluminum coils | Aluminum Foils| Aluminium diamond plate sheet | Aluminum checker plates | Aluminium chequer plate sheet
Product Tags:
|
|
5083 5052 Marine Grade Aluminium Plate Boat Hulls Sheets DNV Approved Images
|
